SONET/SDH TMS Demo Video

Below is a video that demonstrates the operation of NComm’s SONET/SDH TMS software.

During the demonstration, the TMS software will be built on a 64-bit Linux machine that is connected to an Agilent OMNIBER 37718 test set operating in OC-3 mode. After the software is built, the TMS kernel module will be installed into the Linux Kernel. The Jump Start Application will also be built and will be used to control the demonstration. The system will be using a PMC-Sierra PM8310 device and will show an OC-3 interface with VT1.5 mapping encapsulating a T1 interface. Alarm processing and performance monitoring of the SONET interface as well as the underlying T1 interface will be shown.

Please press the arrow to start the video

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

If you want to make the screen larger, please use the zoom feature in your browser.

We hope you enjoyed our video. Please see the other sections of our website for more specific information on the products that were featured here.

 

Copyright © NComm, Inc. 2017 All Rights Reserved ncomm logo

81 Main Street, Suite 201, Kingston, NH 03848
Phone: 1-603-347-5261 Fax: 1-603-347-5368

 

Home Privacy